The Original Ink Cartridges Of Hp Printers Are Expensive, And Most People Can’t Afford Them, So Many People Choose To Add Ink To The Old Ink Cartridges To Save Costs, But The Printer Cannot Recognize The New Ink Installed In The Old Ink Cartridges. At This Time, The Printer Needs To Be Reset To Make The Printer Feel That It Is A New Ink Cartridge, And Then Count Again. Today I Will Tell You About 4 Reset Methods.
Old Cartridge Method
Use This Method If You Have Old Ink Cartridges On Hand.
Take Out The Freshly Filled Cartridges And Replace Them With A Pair Of Old Cartridges. Wait For The Printer To Recognize The Cartridges, And Then Print A Cartridge Alignment Page, Depending On Your Model. Remove The Ink Cartridges And Replace Them With The Second Set Of Old Ink Cartridges. After The Cycle Is Complete, Remove The Old Ink Cartridge And Replace It With A Freshly Filled One. The Printer Will Treat Them As New Cartridges Because Many Models Only Have Enough Memory To Store The Last Two Cartridges Installed. This Method Works For The Hp63xl Ink Cartridge, Which Is A Combination Of Black And Tri-color Ink Cartridges.
Cartridgeless Method
Some Models Can Track Up To Five Sets Of Cartridge Identifiers In Their Memory To Support Another Technology. In This Case, All You Need To Do Is Remove The Cartridge From The Printer And Turn The Printer Off, Then On Again For At Least 20 Seconds. This Will Replace The Tape Information In One Of The Memories With Blanks. Now Repeat This Process Four Times And The Printer's Memory Should Be Empty. When You Put The Refilled Cartridge Back Into The Printer, It Should Forget The Page Count And Recognize It As A New Cartridge.
Tape Method
You Need To Apply A Small Piece Of Tape To A Specific Contact On The Cartridge, Start The Printer, Then Remove The Cartridge And Move The Tape To Another Location. This Technique Is Tricky Because Different Cartridges Require You To Cover Different Contacts, And The Order May Change.
Resetting An Hp Ink Cartridge With A Chip
Newer Models Of Hp Printers Usually Have A Chip On The Ink Cartridges, Rather Than Relying On The Printer To Store Page Counts. These Are A Little Tricky. You'll Need To Pop Out The Factory Chip With A Small Screwdriver Or Similar, Then Replace It With A Third-party "auto Reset Chip" Or Arc. These Are Available With Or Without Ink Level Monitoring So That The Cartridges Can Be Refilled Using This Method For Hp 902xl Ink Cartridges.
